006 Only security administrators can run this utility!
007 Setup
008 Help
010 Your hard drive is formatted with a non-standard disk manager.
011 is compatible with hard disks formatted with the DOS FDISK command.
012 To maintain data integrity, boot protection will not be installed. For more information, please contact technical support.
013 Press the Next button to continue.
014 Security is already installed on this computer. It must be uninstalled before it can be reinstalled. Would you like to uninstall security now?
020 Please fill in the information below. The Serial Number and Super Password are found on your registration card.
021 To install the Eval Version, press the Eval Version button.
022 &Registered to:
023 &Serial Number:
024 S&uper Password:
025 Evaluation Version
032 Thank you for evaluating
033 Please take a moment to register
034 There are many benefits to registering, including information on the latest versions and features, access to our support BBS and discounted upgrade offers.
035 Please place Disk #
036 in the drive indicated, or type in the PATH where file
037 is located.
038 Cancel Install
039 Do you wish to stop the installation process?
040 Setup Wizard will now install system security files to your C:\SAFER directory, and user security files to your C:\PUBLIC directory.
041 Source file:
042 Destination file:
043 files were successfully copied!
044 Please select the Next button to continue.
045 could not be created. Please make sure the drive exists and you have sufficient rights to create new directories.
046 Please select another installation directory.
047 Directory Error
048 INSTALL cannot copy the following required file and cannot continue.
049 Install Error
050 Type in a name for this workstation. The name can be up to eight letters and numbers, and must be a valid file name.
051 Examples of valid names include SAFER, OFFICEPC, and PRIVATE.
052 &Workstation Name:
055 Setup Wizard could not update file C:\SAFER\SAFER.DAT. Please check your system and run SETUP again.
056 Cannot Update File
057 Error While Attempting to Create Directories on Destination Drive.
058 is not properly installed. Please re-run setup at a later time after the problem is corrected.
060 The Setup Wizard will now save uninstall file
061 .SEC to a diskette. This diskette will allow you to access your hard disk if it becomes corrupted.
062 Please insert a writeable diskette into a floppy drive and select the letter of the drive. Press the Next button when ready.
063 &Diskette Drive Letter:
064 * Saving Config.sys to
065 * Updating Config.sys
066 * Creating Config.sys
067 is in use. Please close all applications and re-attempt Setup.
068 could not be installed.
070 Please configure the type of boot protection required. If you are not using menus in your Config.sys file, and do not need to press any keys while Config.sys is loading, the first option should be selected. Otherwise, choose the second option.
071 Once installed, the only way to change options is to uninstall and then reinstall security.
072 Keyboard disabled until login screen appears
073 Keyboard use allowed during startup
075 * PATH statement already contains C:\PUBLIC
076 * Autoexec.bat not found, creating new one
077 * Updating Autoexec.bat
078 * Adding user security files to PATH statement
079 * Saving Autoexec.bat to
080 Setup Wizard is now updating your system so that security will automatically load when your PC is started.
081 * Installing boot protection
082 Could not update boot records! Please make sure you do not have any virus protection software active.
083 Boot Protection Error
084 Your system was successfully updated. Press Next to continue.
085 Could not update the AUTOEXEC.BAT file. Please check your system and run SETUP again.
086 Setup Error
087 Could not update the CONFIG.SYS file. Please check your system and run SETUP again.
088 Cannot continue installation because DISK.* file is missing from
089 The Install Script file is corrupt!
090 Setup Wizard can create a
091 and icons for easy program access.
092 Select one of the choices below, and then select the Next button to continue.
093 Create
094 and icons
095 Do not create
096 and icons
097 Creating Security Group and Icons...
098 successfully installed!
099 To activate security, please restart your computer.
100 The workstation uninstall file was not found in the C:\SAFER directory. Type in the full path and file name of the uninstall file. For example, A:\SAFER.SEC.
101 &Uninstall file full path
102 &Exit and Reboot
103 The uninstall file specified does not exist. Please try again.
104 The file specified does not appear to be a valid uninstall file. Please try again or contact your vendor for assistance.
105 Uninstall File Error
106 * Removing Security Group and Icons
110 To uninstall security, a Challenge/Response code is required. Please contact your software vendor for the Response code that fits the Challenge code below.
111 Challenge Code:
112 &Response Code:
113 Response code is incorrect! Please try again.
120 Security System successfully uninstalled. Please restart your system now.
121 Cannot read boot records. Please check your system and run uninstall again.
122 Security will now be uninstalled from your system.
123 * Removing hard disk boot protection
124 Error: Disk Error Unlocking Hard Drive!
125 Error: Could not update Config.sys!
126 Error: Could not update Autoexec.bat!
127 * Removing security files
130 * Adding uninstall information to Windows95 Registry
131 * Removing uninstall informatin from Windows95 Registry
132 Error: Could not update Windows95 Registry!
400 Please insert a writeable diskette into
401 : and select the Retry button. Or press the Cancel button to select another location.
402 Workstation uninstall file
403 .SEC already exists.
404 If you overwrite this file, you will not be able to use it to perform an emergency uninstall of the computer that it came from.
405 Select Cancel to use another diskette or to select another workstation name, or OK to overwrite the file.
406 Workstation name already exists
407 Setup Wizard could not save the boot sector to this diskette. Please insert another diskette or select a different location.
408 Emergency Uninstall File Creation Error
409 Setup Wizard could not save a backup copy of the boot sector to the C:\SAFER directory. Please check your system and restart the setup.
410 Emergency Uninstall File Creation Error
411 The password is not correct for this serial number. Please check your entries.
500 Thank you for evaluating
501 The eval version is identical to the commercial version with the following exceptions:
502 * Hard disk boot protection is not installed
503 * Super password is displayed on the login screen
504 To login to the system if you forget your User Name or Password, type the following on the login screen:
505 User Name: SUPERMSF Password:
506 Please write this down for future reference.
510 Remember to fill out your Registration Card and return the Business Reply half to Safetynet.
511 Keep the other half in a safe place, since it contains the unique Super Password used for this program.
